Type training · Airbus A320 family B1.1 · ATA 05–12
Airbus A320 B1.1: Aircraft General and Servicing (ATA 05–12)Type training questions & answers
Zoning, jacking and levelling, towing, parking and mooring, and the maintenance safety walk-around.
- A worked explanation on every question
- Written for the A318–A321 with IAE V2500-A5 engines
- Read in English or 15 other languages
Sample Aircraft General and Servicing questions with answers
Three questions from the free preview. Think of your answer first, then open the explanation.
1.Where is the A320 X-axis reference (station 0) for structural measurements?
- A.At the nose cone tip
- B.At the forward pressure bulkhead
- C.100 in forward of the nose
Show answer and explanation
Correct answer: C. 100 in forward of the nose
Station 0 for the X axis is 100 in (254 cm) forward of the aircraft nose.
2.Which A320 axis runs along the wing span?
- A.Z axis
- B.Y axis
- C.X axis
Show answer and explanation
Correct answer: B. Y axis
X is longitudinal along the fuselage, Y is spanwise and Z is vertical.
3.How many major zones does the A320 have?
- A.Eight
- B.Six
- C.Ten
Show answer and explanation
Correct answer: A. Eight
Each major zone is the first digit of a three-digit zone number.
Part of the Airbus A320 family B1.1 type course
One chapter of the Airbus A320 family B1.1 type course question bank, for the A318–A321 with IAE V2500-A5 engines, written in our own words for revision. Your type course and the aircraft maintenance manual stay the authority: limits and procedures can differ between airframes and operators.
All Airbus A320 family B1.1 chapters →More Airbus A320 family B1.1 chapters
- Airbus A320 B1.1: V2500-A5 Thrust Control, Reverser and Oil (ATA 70–80)
- Airbus A320 B1.1: Air Conditioning and Pressurization (ATA 21)
- Airbus A320 B1.1: V2500-A5 Engine, Fuel and FADEC (ATA 70–80)
- Airbus A320 B1.1: Electrical Power (ATA 24)
- Airbus A320 B1.1: Equipment, Furnishings and Lights (ATA 25, 33)
- Airbus A320 B1.1: Doors (ATA 52)